Mister Can Help You Stay Cool in Summer
Summer is coming and it’s a good time to look into ways to remain cool if you are located where it gets very hot. In areas such as Phoenix, Arizona, where it gets very hot, people have figured out how to cope with the high temps, and many of the smart locals have got “stayin’ cool” down to a science.
One of the easiest means to stay cool is to “just add water!” In the desert Southwest, there are lots of pools! If you don’t have a swimming pool, then go for the lakes - Phoenix is known for having many more boats per capita than just about any other location in the nation! Or go spend the day tubing the river.
They declare it’s a “dry heat,” but Phoenicians realized a years ago how to make things cooler with water. Back in the days before air conditioning, they used “swamp coolers” to cool off their buildings. A swamp cooler blows moist, cool air through a building, which cools things off as the moisture evaporates. It’s called evaporative cooling, and it’s much less costly to operate than A/C. This works quite nicely throughout the dry months, but not really so well during the rainy monsoon season in late summer. Smart people use the evaporative cooler to save cash right up until the monsoon, then they switch on the A/C.
Outdoors, evaporative cooling is effective, even in the humid time of year. That is definitely why so many folks in Phoenix install mister systems. These types of systems squirt water into the surroundings and can cool off a deck or enclosed place relatively well, particularly if the air is moving. Outdoor mister fans may chill things down up to 30 degrees (fahrenheit). You are likely to see mist systems at just about all dining establishments with open-air patios, and any other facility that requires folks to be outdoors in the heat. Many residents who have a backyard deck set up a mister system in order to enjoy their backyard more in the summer season.
Although they don’t call for very much care, you need to carry out some seasonal upkeep to make sure your mist system will operate properly once you will be needing it. In the Fall, it merely means draining the water from the lines along with disconnecting the lines for the winter season.
In Springtime, before the Summertime heat arrives, you are going to need to reconnect the lines, check the pump (or water source) to see that it’s doing the job, and examine your misting lines for leaks. If your system uses stainless steel mist tubing, this won’t be much of a problem. Just examine the joints and connectors for leaks. If you’re using plastic lines, you’ll want to examine the whole system for splits and ruptures.
The next thing to perform is to be certain that the mist system nozzles aren’t clogged. If you live in an area that has hard water, the nozzle might be clogged by mineral deposits. It may be feasible to simply scrape the debris from the surface of the nozzle, but if the deposits are inside the mister nozzle orifice, you’ll have to find a pin or an item tiny enough to stick through it in order to clear out the blockage. Be careful not to expand the orifice! What most professional mister system companies do is just change out all the misting nozzles because it’s simpler and takes a lot less time than to try to clean out each nozzle, and the price of mist system nozzles is fairly reduced when you buy them in bulk.
